JINAN UPGOAL MECHANICAL EQUIPMENT CO.,LTD
济南达高机械设备有限公司
Metal Non Metal Laser Cutting Machine
Metal Non Metal Laser Cutting Machine
Economic 1390 Size Metal and Non Metal Co2 Laser Cutting Engraving Machine 130W

Brief Introduction:

Model: UG-1390ML
1300*900mm size
Economic metal head cutting head
Stainless steel/steel cutting ability: 1.2mm at maximum
Leetro MPC8530 controller
Works with O2

INQUIRY NOW

Applications

Applied to a certain of metal and non-metal materials Professional engraving/cutting such as stainless steel,carbon steel,wood,organic glass,plastic, cloth.

Widely used in the industry of Advertising, craft gift, shose, toys, garment, model, construction, package, paper and computerized embroidery &lipping.


Features

1. Welding machine bed with quenching treatment to remove away the stress .Milled by Large precision gantry milling machine ensured the accuracy.  

2. Equipped with metal&non-metal cutting head. Stainless steel, carbon steel, acrylic and wood can be cut.

3. With famous Reci W6 130W seal Co2 laser tube, strong cutting ability and long working life.

4. Knife Strips: With oxidation treatment and low reflection ratio ensured cutting quality

5. Motion System: Imported High precision, low friction force and stand wear and CSK Taiwan linear square guide rail and blocks with 3M belt ensured stable transmission, lower noise

6. Adopting imported focus lens with high luminous and mirror with high relativity ensure stable power transference and laser beam consistency.

7. Adopt 3 phases Yako stepper driver with high dynamic response performance and loading capacity.

8. Rationalized placement of the electronic parts. Optimized heat dissipation effect. Ensured system stability and anti jamming capability.

9. With advanced embedded Leetro MPC8530S DSP real-time laser cutting control system, running faster, laser intensity and speed automatic matching, perfectly realized the consistency of the corner cutting effect high strength cutting table, applicable for metal and non-metal cutting.

10. Industrial water chiller CW-5000(Teyu) is equipped to ensure the machine can work last long time.


    Effective working area 

    1300*900mm

    Laser Type

    Co2 sealed-off laser tube

    Laser tube power

    W6 series, Reci brand

    (Rated power: 130W, max. Power: 160W)

    Working table

    Knife strip

    Driver mode

    3 phases stepper motor and Driver, Yako brand

    Guide rail

    Linear square guide rail ( CSK,Taiwan)

    Transmission

    Belt transmission

    Control panel

    English

    Laser output control

    1-100% software setting

    Engraving speed

    0-60000mm/min

    Cutting speed

    0-10000mm/min

    Control system

    Leetro MPC8530

    Control software

    LaserCut 6.1

    Design software when delivery

    CorelDraw

    Control panel

    DSP offline

    Resolution accuracy

    < 0.01mm

    Location precision

    < 0.01mm

    Highest scanning accuracy

    2500DPI

    Type of cooling

    Industrial chiller, CW-5200 cooling(Teyu S&A)

    Water protection system

    Yes

    Oxygen control system

    Have

    Blow-off system

    Air pump(138W) and air blower(550W)

    Working temperature

    0-45 °C

    Operating humidity

    5-95% (without condensed water)

    Supporting picture format

    PLTDSTDXFBMP, DWGAILAS,etc

    Voltage

    AC 220V/110V, 50/60Hz, single phase

    Certificate

    CE/FDA



made in China 描述2图.jpg

RELATED PRODUCTS
Inquiry now